Filter
Top Products
LT77S
MANUAL
GEARBOX
5.
Remove front cover and gasket.
6.
Retrieve selective washers.
REVERSE
SHAFT,
LAYSHAFT
AND MAINSHAFT
1.
Remove retainer (tool
"
A
"
)
and reverse shaft.
2.
Remove
thrust
washer, reverse gear and
spacer.
3.
Remove reverse lever pin with
"
E
"
clip
attached.
4.
Remove lever and slipper pad.
7.
Remove
bolts
and lift
-
off gear case.
8.
Secure centre plate with nut and
bolt.
ST23OlM
Yt
II
I