Filter
Top Products
LT77S
MANUAL
GEARBOX
-
I.
2
I.
r
DISMANTLE
Bell housing
-
four cylinder engine
1.
Remove transfer box, drain
oil
and clean
exterior.
2.
If
fitted, clutch release bearing clip.
3.
Remove clutch release assembly.
4.
Remove one pivot post bolt, slacken the other
and move post aside.
5.
Remove
six
bolts and withdraw bell housing.
GEAR
SELECTOR
HOUSING
1.
Remove four bolts and remove main gearbox
selector housing.
2.
Remove transfer box housing.
3.
Remove remaining bolts and remove remote
housing.
Bell housing
-
V8
engine
1.
Remove clutch release bearing.
2.
Remove screw and spring clip and remove
release lever.
3.
Remove
"
C
"
clip from pivot post.
4.
Remove six bolts and bell housing.