Filter
Top Products
I
37
MANUALGEARBOX
DEFENDER
9.
Fit oil seal to housing, lip side leading, using
18G
1422.
Apply
SAE
40
oil
to
lip.
10.
Assemble gears to oil pump and fit cover.
ST3254M
GEAR CHANGE
HOUSING
1.
With a length of tube, release the bias spring
from adjusting screws.
2.
Remove bias spring adjusting screws.
ST2186M
3.
Drive
-
out
roll
pin
to
remove bias spring.
4.
Remove gear lever extension from lower gear
lever.
5.
Remove bolt and special washer to remove
lower gear lever.
WARNING: Hold
the nylon spring loaded
causing personal injury.
A
pad while removing the lever to prevent
it
6.
Remove gear selector housing from remote
housing.
10
I
OVERHAUL