Filter
Top Products
37
MANUAL GEARBOX DEFENDER
CAUTION: Ensure that the slots in the
baulk ring align with the synchromesh
slippers while pressing on the bearing.
A
5.
Invert mainshaft and press assembly back
against circlip.
5
’2
7.
Posltlon mainshaft in vice, rear end downwards
and fit second gear needle roller, and second
gear.
8.
Fit third gear bush.
9.
Fit third gear needle
rollers.
10.
Fit third gear.
11.
Fit third gear baulk ring.
MS
47’
\
5
w
LJ
ST3264M
NOTE: Instruction
5
is
necessary since it
is probable that when pressing on the
bearing it will have clamped the first gear
bush preventing
it
from turning.
6.
Reposition mainshaft
in
vice and using a screw
driver blade check that the first gear bush is
free to turn.
6’
ST3256M
ST3233M
Third
-
fourth synchomesh assembly
22
I
OVERHAUL