Filter
Top Products
137
MANUALGEARBOX
DEFENDER
6%
';'
FITTING FIFTH
GEAR
A
to the layshaft front bearing. Tool"D"and
packing disc should be made to the dimensions
given
to
absorb
the
force. The plate also retains
the input shaft bearing outer track.
4.
Fit a new stake nut but do not tighten.
5.
Fit fifth gear assembly to mainshaft.
CAUTION:
Since the fifth gear is a tight
fit on
the
layshaft, the force, when
pressing the gear, must not be transfered
1.
Secure the plate with two 8x25" bolts. Insert
disc between plate and layshaft.
-
2. Release and invert gearbox and remove reverse
shaft retainer plate.
3.
With the extraction
groove
uppermost, drive fifth
gear
on
to
layshaft using
18G
1422.
I,
I
ST2519M
I
28
I
OVERHAUL