Filter
Top Products
1
37
MANUALGEARBOX DEFENDER
NOTE: One bearing cage is twisted in
A
manufacture. The twist causes the gear
to tilt on the shaft forcing the gear into
engagement. Renew bearings if worn or if the
gear jumps out of engagement.
2.
Fit the bearings either way round and secure
with the circlip.
3.
Check condition of idler gear and mating teeth
on layshaft and synchromesh outer member.
ST2447M
p
v
.
;
SELECTORS
1.
Examine selector rail and pins for wear and
damage.
2.
Examine first
-
second selector fork for wear
cracks and damage.
NOTE:
The the selector rail and fork
is
only supplied as a complete assembly.
3.
Examine third
-
fourth selector fork for wear,
cracks and damage.
4.
Examine fifth gear selector fork, pads and pivot
pins.
5.
Examine interlock spools for wear and damage.
1
ST2482M
4
6.
Renew retaining circlips if distorted.
I
'!
.
..
.
..
...
....
.:
.
*i
4.
Examine idler shaft for wear. scores and oittina.