Filter
Top Products
MAINTENANCE WORK ON CHASSIS AND ENGINE 96
9.43Fitting rear wheelx
Warning
Danger of accidents Reduced braking due to oil or grease on the brake discs.
– Always keep the brake discs free of oil and grease, and clean them with brake cleaner when necessary.
Warning
Danger of accidents No braking effect when operating the rear brake.
– After installing the rear wheel, always operate the footbrake until the pressure point is reached.
–
Checking the rear hub rubber dampers.x ( P. 97)
100269-10
– Check parts for damage and wear. Replace damaged or worn parts.
– Remove the bushing. Clean and grease the roll surfaces of the bushing and the shaft
seal ring.
Long-life grease ( P. 170)
– Clean and grease the thread of the wheel spindle and nut.
Long-life grease ( P. 170)
– Mount the rubber damper and rear sprocket carrier in the rear wheel.
– Place the rear wheel in the swingarm and bring the brake disc on the brake caliper into
contact.