KTM 690 ENDURO EU Motorcycle User Manual


 
MAINTENANCE WORK ON CHASSIS AND ENGINE 121
100285-11
Mount and tighten screws.
Specification
Remaining screws, chassis M6 10Nm (7.4lbfft)
Mount the seat. ( P. 103)
9.65Cooling system
600614-10
The water pump in the engine forces the coolant to flow.
The pressure resulting from the warming of the cooling system is regulated by a valve in
the radiator cap. Heat expansion causes excess coolant to flow into the compensating
tank. If the temperature falls, the excess coolant is sucked back into the cooling system.
The specified coolant temperature is therefore permissible without danger of function prob-
lems.
125°C (257°F)