Filter
Top Products
STORAGE 151
– Cover the motorcycle with a porous sheet or blanket.
Info
Do not use non-porous materials since they prevent humidity from escaping, thus causing corrosion.
Avoid running the engine for a short time only. Since the engine cannot warm up properly, the water vapor produced during
combustion condenses and causes valves and exhaust system to rust.
14.2Putting into operation after storage
– Remove the motorcycle from the work stand. ( P. 56)
–
Recharge the battery.x ( P. 105)
–
Install the battery.x ( P. 104)
– Set the clock. ( P. 29)
– Fill up with fuel. ( P. 51)
– Carry out checks before putting into operation. ( P. 42)
– Make a test ride.