KTM 690 ENDURO EU Motorcycle User Manual


 
0
0
BB
0
0
AA
MAINTENANCE WORK ON CHASSIS AND ENGINE 118
Press the new flasher bulb carefully into the holder and turn it clockwise as far as it will
go.
Flasher light(BA15s) ( P. 158)
Mount the orange cap.
Position the diffuser.
Insert the screw and turn it first counterclockwise until you feel it click into the thread.
Tighten the screw.
Check the flasher function.
9.61Checking headlamp setting
400408-10
On a light-colored wall with a horizontal area in front of it, make a mark as high as the
center of the low beam headlight.
Make another mark at a distance of under the first mark.
Specification
Distance 5cm (2in)
Stand the motorcycle at a distance of in front of the wall and switch on the low
beam.
Specification
Distance 5m (16ft)
Check the headlamp setting.
The boundary between light and dark must be exactly on the lower mark for a motor-
cycle with driver.
» If the boundary between light and dark does not meet specifications:
Adjust the headlight range. ( P. 119)