Filter
Top Products
MAINTENANCE WORK ON CHASSIS AND ENGINE 84
400418-10
– Check that leaf spring in the brake caliper and sliding plate in the brake caliper
support are seated correctly.
100291-01
– Insert the brake pads, insert the bolt and mount the split pin.
– Operate the hand brake lever repeatedly until the brake linings lie on the brake disc and
there is a tight spot.
100254-12
– Adjust the brake fluid level to level.
Specification
Measurement of 5mm (0.2in)
Brake fluid DOT4/DOT5.1 ( P. 166)
– Position the cover with the membrane. Mount and tighten screws.
Info
Clean up overflowed or spilt brake fluid immediately with water.