Filter
Top Products
MAINTENANCE WORK ON CHASSIS AND ENGINE 137
9.80Mounting oil filterx
100204-10
– Check parts for damage and wear. Replace damaged or worn parts.
– Insert oil filter and.
– Oil the O-rings of the oil filter cover. Refit the oil filter cover and.
– Mount and tighten screws.
Specification
Screw, oil filter cover M5 6Nm (4.4lbfft)
9.81Cleaning oil screensx
Warning
Danger of scalding Engine oil and gear oil get very hot when the motocycle is driven.
– Wear suitable protective clothing and gloves. If you scald yourself, hold the affected area under cold water immediately.
Warning
Environmental hazard Problem materials cause environmental damage.
– Dispose of oil, grease, filters, fuel, cleaning substances, brake fluid, batteries, etc. according to regulations.
– Place a suitable container under the engine.