Filter
Top Products
MAINTENANCE WORK ON CHASSIS AND ENGINE 98
100271-10
– Check rubber dampers of the rear hub for damage and wear.
» If the rubber dampers of the rear hub are damaged or worn:
– Change all rubber dampers in the rear hub.
100272-10
– Lay the read wheel on a workbench with the rear sprocket facing upwards and insert the
wheel spindle in the hub.
– To check the play, hold the rear wheel tight and try to rotate the rear sprocket.
Info
Measure the play on the outside of the rear sprocket.
Play in rubber dampers, rear wheel ≤5mm (≤0.2in)
» If the play is more than the specified value:
– Change all rubber dampers in the rear hub.
–
Fit the rear wheel.x ( P. 96)
9.45Tire condition checking
Warning
Danger of accidents Uncontrollable handling behavior caused by a flat tire.
– For your own safety, have damaged tires changed immediately.