KTM 690 ENDURO EU Motorcycle User Manual


 
MAINTENANCE WORK ON CHASSIS AND ENGINE 103
9.49Mounting the seat
100276-10
Hook slot of the seat onto screw, press the rear downward and at the same time
push it forward.
Push locking pin into lock housing and push the back of the seat down until the
locking pin locks in place with an audible click.
Finally, check that the seat is correctly mounted.
9.50Removing the batteryx
Warning
Risk of injuryBattery acid and battery gases cause serious cauterization.
Keep batteries out of the reach of children.
Wear suitable protective clothing and goggles.
Avoid contact with battery acid and battery gases.
Keep the battery away from sparks or open fire. Charge only in well ventilated rooms.
In the event of skin contact, rinse with large amounts of water. If battery acid gets in the eyes, rinse with water for at least 15
minutes and contact a doctor.
Remove the seat. ( P. 102)