Filter
Top Products
OPERATING ELEMENTS 30
700115-10
– Switch on the ignition by turning the ignition key in the position .
– Press theMODEbutton several times until theODO display mode is active.
– Keep theMODEbutton and theSETbutton pressed simultaneously.
The time begins to flash.
– Press theMODEbutton to adjust the hour.
– Press theSETbutton to adjust the minute.
– Keep theMODEbutton and theSETbutton pressed simultaneously.
The time is set.
5.22Combination instrument -ODO display
700120-01
InODO mode, the total distance covered is shown in kilometers or miles.
Info
This value remains intact even if the battery is disconnected and/or the fuse blows.
5.23Combination instrument - setting/resettingTRIP1 display
Info
The tripmasterTRIP1 operates constantly and counts up to999.9.
You can use the tripmaster to measure trips or the distance between refuelling stops. After reaching 999.9, the tripmaster begins
again at 0.0.