Filter
Top Products
MAINTENANCE WORK ON CHASSIS AND ENGINE 75
9.25Adjusting chain guidex
100299-10
– Remove screws and. Take off the chain guide.
Conditions
Number of teeth: ≤44teeth
– Insert nut in hole. Position the chain guide.
– Mount and tighten screws and.
Specification
Remaining screws, chassis M6 10Nm (7.4lbfft)
Conditions
Number of teeth: ≥45teeth
– Insert nut in hole. Position the chain guide.
– Mount and tighten screws and.
Specification
Remaining screws, chassis M6 10Nm (7.4lbfft)
9.26Checking brake discs
Warning
Danger of accidents Reduced braking due to worn brake discs.
– Worn brake discs should be replaced immediately in an authorized KTM workshop.