Filter
Top Products
OPERATING ELEMENTS 31
700121-01
– Switch on the ignition by turning the ignition key in the position .
– Press theMODEbutton several times until theTRIP1 display mode is active.
– Keep theSETbutton pressed.
TheTRIP1 display is at0.0.
5.24Combination instrument - setting/resettingTRIP2 display
Info
The tripmasterTRIP2 operates constantly and counts up to999.9.
You can use the tripmaster to measure trips or the distance between refuelling stops. After reaching 999.9, the tripmaster begins
again at 0.0.
700122-01
– Switch on the ignition by turning the ignition key in the position .
– Press theMODEbutton several times until theTRIP2 display mode is active.
– Keep theSETbutton pressed.
TheTRIP2 display is at0.0.