KTM 690 ENDURO EU Motorcycle User Manual


 
MAINTENANCE WORK ON CHASSIS AND ENGINE 66
9.15Adjusting play of steering head bearingx
Jack up the motorcycle. ( P. 56)
100297-10
Loosen screw. Remove screw.
Loosen and retighten screw.
Specification
Screw, top steering head M20x1.5 10Nm (7.4lbfft)
Using a plastic hammer, tap lightly on the upper triple clamp to avoid strains.
Fully tighten screw.
Specification
Screw, top triple clamp M8 17Nm (12.5lbfft)
Mount and tighten screw.
Specification
Screw, steering stem M8 20Nm
(14.8lbfft)
Loctite
®
243™
Check play of steering head bearing.x ( P. 65)
Remove the motorcycle from the work stand. ( P. 56)