Filter
Top Products
After executing the PCX5 software and the desired screen is displayed,
select Print Screen. Refer to the user’s guide provided with your computer’s
operating system for additional information on using the “GRAPHICS”
command.
4.8 ABOUT
This option allows you to view information about the current version of the
PCX5 software. Select “OK” to continue.
Figure 4-12: ABOUT PCX5 DIALOG BOX
4.9 EXIT
This option allows you to exit from the PCX5 program. You may also exit
without pulling down the File menu by using the accelerator key <Ctrl+X>.
If the current plot has been modified, a dialog box will remind you to save the
file.
Figure 4-13: SAVE PLOT DIALOG BOX
If the SAVE ON EXIT option is selected on the Config Menu (see Section 9.8),
all currently selected configuration parameters (e.g., Comm Port, Units,
Coordinates) will be saved to the configuration file upon exiting the PCX5
program. If no customized configuration file was specified, configuration
parameters will be written to the default configuration file, PCX5.CFG (see
Section 9.7).
4-7