Filter
Top Products
2-1
CHAPTER 2
INSTALLATION
2.1 PACKAGE CONTENTS
Your PCX5 Software Kit includes the following items:
1) Files obtained by installing software include:
· PCX5.COM - Main program
· README.TXT - May contain pertinent notes, information about
the latest release
· Sample data files
· Auxiliary files required by PCX5
NOTE: The above files are in compressed format. See Section 2.6 for
installation instructions.
2) PC Interface Cable
3) This Owner’s Manual
2.2 SYSTEM REQUIREMENTS
Minimum
PC configuration required:
· IBM-compatible computer (AT, 386 or 486)
· 640K memory
· 3.5” (1.44 Mb) floppy disk drive
· Hard Disk Drive
· EGA or VGA Graphics Adaptor
Highly recommended
configuration (for speed considerations):
· 386 or better processor
· 2 Megabytes RAM or more
· LIM 3.2-compatible Expanded Memory Driver (EMS, up to 16 Mb, is
used to store plot files)
· VGA Graphics Adaptor
· Microsoft
®
-compatible mouse
DOS Memory Requirements:
For the PCX5 software to function correctly, you must have a minimum of
435K of DOS memory free before running the program. To determine the
amount of free memory, execute the following command: