Filter
Top Products
34 GPSMAP 496 Owner’s Manual
Aviation
Aviation Mode Pages > Map Page
Setting the Bug Indicator
You can set a bug indicator to show bearing or course to steer. You
can also enter a specic heading reference for the indicator.
To set the Bug Indicator:
1. From the Map Page, press MENU to open the options menu.
2. Use the ROCKER to highlight Set Bug Indicator and press
ENTER.
3. A list of Bug Indicator options appears. By default, the bug
indicator shows Bearing (BRG) to waypoint, but can also show
the Course to Steer (CTS) or can be User Selected. The User
Selected option allows you to mark a heading reference on the
graphic HSI. This provides a visual cue of an important heading
for current or future use. You can also turn the Bug Indicator off
here.
4. Highlight the option from the list, and press ENTER.
You can also set the Bug Indicator on the HSI shown on the Panel
Page. Open the Panel Page and press MENU. Follow steps 2
through 4 above.
Setting Up the Map Page
The Map Page Setup allows you to adjust the way items appear on
the Map Page.
To change a map setup option:
1. From the Map Page, press MENU to open the options menu.
2. Highlight Set up Map, and press ENTER.
3. Press left or right on the ROCKER to highlight the tab, then up
or down on the ROCKER to highlight to the eld you want to
change, and press ENTER.
General Tab of the Map Page Setup
4. Press up or down on the ROCKER to highlight to the setting, and
press ENTER to select the new setting.
5. Press PAGE or QUIT to exit.