Garmin GPSMAP 496 GPS Receiver User Manual


 
20 GPSMAP 496 Owner’s Manual
Aviation
Basic Operation in Aviation Mode > Finding a Nearby Point
Viewing Communication Frequencies
The Nearest Pages list up to ve nearest ight service station
(FSS) and air route trafc control center (ARTCC) points of
communication. The closest communication point is shown rst,
with additional points available when selected. For duplex operation,
the corresponding VOR is listed (by identier) and the transmit and
receive frequencies are denoted by a TX and RX respectively.
To view additional communication frequencies:
1. Press NRST to open the Nearest Pages.
2. Use the ROCKER to select the ARTCC or FSS sub tab.
3. Press the ROCKER down to highlight Center or Station (based
on which tab you are on), and press ENTER.
ARTCC Tab
4. Select the numbered item that you want from the list, and press
ENTER to show the communication information. The lowest
numbers on the list are the closest communication points.
Viewing Airspace Alert Information
When an airspace alert appears, press NRST to automatically show
nearby airspace information in the Airspace tab. This information
includes name, time to entry (if applicable), and status. Normally,
only one or two airspace alerts occur at a time, but with sectorized
controlled airspace, such as many Class B areas, there are more.
Status information can appear as follows:
Ahead
—your projected course takes you inside an airspace within
the next 10 minutes or less.
Near
—you are within two nautical miles of an airspace but not
projected to enter it.
Near & Ahead
—you are within two nautical miles of an airspace
and your current course takes you inside the airspace.
Inside Airspace
—you are within the boundaries of the airspace.