Filter
Top Products
56 GPSMAP 2106/2110 Owner’s Manual
MAIN MENU > ALARMS TAB
To view detailed information:
Highlight a message, and press ENTER. A window opens, showing
detailed information for the selected message.
Alarms Tab
Use the Alarms tab to define alarm settings. The Alarms tab is divided into three
sub tabs: System, Nav, and Sonar.
Alarm messages appear in red across the status bar or change the appearance of
a data field if that field shows alarm-related data (for example, depth or voltage).
Press QUIT to acknowledge an alarm message. The status bar and data field
remain red while the alarm condition persists.
To set an alarm:
1. Use the ROCKER to highlight the System, Nav, or Sonar sub tab.
2. Highlight the field next to the alarm you want to set, and press ENTER.
3. Change the mode to the setting you want, and press ENTER.
4. Repeat steps 1–3 to set additional alarms, and then press ENTER when
finished.