Filter
Top Products
32 GPSMAP 2106/2110 Owner’s Manual
MAIN PAGES > CONFIGURING MAIN PAGES
To change the size of the Digital data fields:
1. Press and hold DATA/CNFG to open the Configuration window.
2. Using the ROCKER, highlight the Digital 1 or Digital 2 adjustment slider,
and press ENTER.
3. Press up on the ROCKER to show larger text with fewer data fields; press
down on the ROCKER to show smaller text with more data fields. As you
adjust the data field size, the configurable data fields automatically appear
in the Digital 1 and Digital 2 lists.
4. Press QUIT to exit the slider adjustment. Press QUIT again to return to the
main page.
Digital 1
with large
data fields
Digital 2
with small
data fields
To change Digital 1 or Digital 2 data fields:
1. Press and hold DATA/CNFG to open the Configuration window.
2. Highlight the data field you want to change, and press ENTER.
Defaults soft key
3. Press up or down on the ROCKER to highlight the type of data you want
to show, and press ENTER.
4. Press QUIT to exit.
To restore the factory default configuration:
1. Press and hold DATA/CNFG to open the Configuration window.
2. Press the Defaults soft key.