Filter
Top Products
3
Getting Started
Entering Data
Naming a waypoint or placing any sort of data that has not been predefined requires the use of
both the ARROW KEYPAD and the ENTER/MARK key.
To enter a name or number in a data field:
1. Once you have accessed a page with programmable data fields (i.e. ‘ Waypoint Edit’) you can use
the ARROW KEYPAD to move the cursor (Highlight) to fields on the page. Use the UP/DOWN
arrows to move up or down and the LEFT/RIGHT arrows to move sideways.
2. Pressing the
ENTER/MARK key with the field highlighted begins the process for entering data in
the form of alphanumeric characters.
3. Use the ARROW KEYPAD UP/DOWN arrows to cycle through numbers 0 to 9, plus/minus symbols,
blank space, and the alphabet. Pressing and releasing the keypad moves you character by character
through the list. Pressing and holding the keypad moves you rapidly through the list.
4. Use the ARROW KEYPAD LEFT/RIGHT arrows to move to the next character on the line or
backwards to edit characters. If there are more than two lines of data, keep pressing to the RIGHT
to drop down to the next line.
5. When data entry is completed press
ENTER/MARK to accept data, then move to the next
programmable field. Not all data fields are programmable, like the date and time. When moving
about a page with these type of fields, the cursor will skip over them.
Every field and button on this page
can be programmed or activated.
• A waypoint symbol can be selected
from a list of symbols.
• A comment can be added.
• The coordinates can be changed.
Pressing UP or DOWN
on the ARROW KEYPAD
changes numbers and let-
ters.
Pressing LEFT or RIGHT
on the ARROW KEYPAD
moves the cursor along the
line or to the next line.
• The waypoint can be renamed.
• A depth can be entered.
• Option buttons can be activated.
Data Entry Field
Non-programable
data fields