Filter
Top Products
42
Reference
System Setup
To select a System Setup option:
1. With the System Setup on the screen, select the fi le tab for the desired function. The associated
information and options are automatically displayed when the fi le tab is selected.
2. Once the desired fi le tab has been selected, use the DOWN key to select the desired option to view
or modify.
3. Press ENTER to change to a different option. In most cases, a list of available options is shown.
4. Use the ROCKER KEYPAD to select the desired choice, then press ENTER again to accept the
change.
5. Use the UP key to return to the fi le tab area and select another fi le tab, if desired.
At some point in time, you may desire to restore the default System Setup settings of the
StreetPilot III. This can be done by selecting the option called ‘Restore Original Settings.’
To restore the original settings:
1. Use the ROCKER KEYPAD to move the cursor to the fi le tab for which you want to restore the
original settings.
2. Press the MENU key. A window is displayed with ‘Restore Original Settings’ selected.
3. Press ENTER. Only the settings for that fi le tab are modifi ed.
4. If desired, repeat steps 1 through 3 for other fi le tabs.
The fi le tab headings and System Setup functions are:
General – GPS Mode, Units, Voice, Battery Type, Attention Tone and Keypress Tone.
Guidance – Off-Route Recalculation and Next Turn Pop-Up.
Routing – Route Preference, Calculation Method, Ask Me My Preference, Calculate Routes for and
Avoid (U-Turns, Toll Roads and Highways).
Time
– Time Format, Daylight Savings, Time Zone, Time, Date, Sunrise and Sunset.
The System Setup pages allow you to customize the
features of the StreetPilot III.
You can completely reset the System Setup features on
each fi le tab to their original settings.
190-00256-10_0B.indd 42 1/13/2003, 10:34:06 AM