Filter
Top Products
9
Keypad Usage
POWER (Red Bulb Symbol) – Press and hold to turn the StreetPilot III on and off. Press momentarily while
power is on to display the backlight/contrast adjustment window.
PAGE – Switches between main pages and returns display from an option window back to a main page.
QUIT – Returns display to a previous page. When entering data, restores the previous value (cancels
data entry).
ENTER/MARK – Confi rms a selected menu option. When entering data, it allows you to initiate entry,
and then to accept the selected value(s). Press and hold to capture your present position and save it as
a waypoint.
ENTER/MARK can also capture the location of the panning arrow on the Map page.
ROCKER KEYPAD – Selects menu options and enters data. Also controls movement of the panning cursor
on the Map page.
Zoom IN and OUT – Adjusts map scale to show a smaller area (more detail) or a larger area (less detail).
FIND – Searches the database for Cities, Interstate Exits, Waypoints, and Recently found places. If an
optional MapSource™ City Navigator or MetroGuide™ map data card is installed, it also searches
for Points of Interest, Addresses, or Intersections. Allows the listed items to be viewed on a map or
selected as a destination.
MENU – Displays a menu of options for the current page. Press twice to display System Setup options.
ROUTE – Displays a pop-up window of route navigation features.
VOL/SPEAK – Adjusts the speaker volume. Press and hold until the controller appears on the left side
of the screen. To hear the volume count (i.e., 1, 2, 3, 4, 5, 6, 7, 8) press up or down on the ROCKER
KEYPAD
. Each press will activate the audio number. Pressing VOL/SPEAK also triggers the voice repeat
function when navigating.
Introduction
Keypad Usage
190-00256-10_0B.indd 9 1/13/2003, 10:33:30 AM