Garmin 135 GPS Receiver User Manual


 
Active Route Page Options
The following options are available from the active route page:
• Invert Route?— activates the active route in reverse order and begins navigation.
• Activate Route?— reactivates the active route and selects the route leg closest to
your current position as the new active leg.
• Edit On Map?— allows you to edit the selected route graphically (see pages 63-64
for specific instructions).
• Clear Route?— allows you to clear all waypoints from the selected route.
• Copy Route?— allows you to copy the waypoints of the active route to another
route.
• Change Data Fields?— allows you to define the data displayed in the distance
and ETE fields. four data options are available:
• DIS– distance to active wpt • DTK– desired track
• ETE– estimated time enroute • ETA– estimated time of arrival
• Restore Defaults?— resets all active route page options to the factory settings.
• Deactivate Route?— stops navigation of the route you are currently navigating.
• Setup Simulator?— allows you to define speed, course and position values while
in simulator mode. See the Getting Started Tour for more on using the simulator
mode.
69
The ‘Change Data Fields?’ option lets you specify
what information is displayed for each route way-
point. Four data options are available: distance,
desired track, and ETA or ETE to each route way-
point.
SECTION
9
ROUTES
Active Route Page
Options
GPS 135 Rev C 8/4/98 4:19 PM Page 69