Filter
Top Products
Position Page Options
The GPSMAP 135 Sounder’s position page features a context-sensitive options
page that provides access to functions and features relating to the position page.
To display the position page options:
1. Press
O
.
To select a menu option:
1. Highlight the desired option and press
T
.
The following options are available:
• Reset Trip Distance?— resets the trip odometer (TRP) field to zero.
• Change Data Fields?— allows you to choose the data displayed in the four user-
selectable data fields. Eight data types are available:
• SOG— speed over ground • ALT— altitude
• VDC— DC voltage • COG— course over ground
• TRP— distance traveled • DPT— depth
• STW— speed through water • TMP— temperature
To change a data field:
1. Highlight the ‘Change Data Fields?’ option and press
T
.
2. Move the field highlight to the field you want to change and press
T
.
3. Select the desired data field option and press
T
.
• Restore Defaults?— resets all data fields to the factory settings.
• Setup Simulator?— allows you to define speed, course and position values while
in simulator mode. See the Getting Started tour for more on using simulator mode.
24
SECTION
2
POSITION PAGE
Options
A
B
A. The four data fields at the top of the position page
can be changed by selecting the ‘Change Data
Fields?’ option.
B. Each data field can be set to display speed over
ground, course over ground, distance traveled, alti-
tude, DC voltage, depth. speed through water and
temperature display are available if you are using a
properly equipped transducer.
GPS 135 Rev C 8/4/98 4:17 PM Page 24