Filter
Top Products
GPSMAP 400/500 Series Owner’s Manual 27
Where To?
4� Press SELECT� Repeat this step to add additional turns�
5� Press MENU to cancel, to undo the last turn, or to begin
navigating the route�
To create a route in another location:
1� From the Home screen, select Information > User Data >
Routes > New Route�
2� Select Use Chart or Use Waypoint List�
3� If you select Use Chart, use the map pointer ( ) to select the
initial location at which you want to start the new route� If you
select Use Waypoint List, select the rst waypoint on the route�
4� Choose the location of the rst turn and press SELECT� Repeat
until the route is complete�
5� Select MENU to save the route�
6� Select the route to edit the route, delete the route, or navigate to
the route�
To create a route using Automatic Guidance (when using a
preprogrammed BlueChart g2 Vision card):
1� From the Navigation chart, select your destination�
2� Select Navigate To > Guide To� Your route is calculated�
: You can change the automatic guidance path to a route
by selecting the end of the path and selecting >
. The automatic guidance path stays on the screen,
allowing you to trace it while creating a route.
To edit a route:
1� From the Home screen, select Information > User Data >
Routes�
2� Select the route to edit�
3� Select Edit Route� You can edit the route name or use the chart
or turn list to edit the route turns�