Filter
Top Products
10 GPSMAP 400/500 Series Owner’s Manual
Using Charts
Other features common to most charts include depth contour
lines (with deep water represented in white), intertidal zones, spot
soundings (as depicted on the original paper chart), navigational aids
and symbols, and obstructions and cable areas.
Navigating to a Point on the Chart
1� From the Home screen, select Charts�
2� Select Navigation Chart, Fishing Chart, or Split Navigation
Chart�
3� Use the Rocker to select the point on the chart to which you
want to go�
4� Press SELECT�
5� Select Navigate To�
6� Select Go To (or Guide To when using a preprogrammed
BlueChart g2 Vision card for Automatic Guidance)�
7� Follow the colored line on the screen to the destination�
To create a route to a point on the chart, see page 26.
Panning the Navigation Chart
Use the to move the map pointer ( ) away from your
current location and to scroll to other areas on the Navigation chart.
As you pan past the edge of the current map display, the screen
scrolls forward to provide continuous map coverage.
As you move the map pointer, you can view the distance and
bearing from your current location and the map pointer’s location
coordinates, in the lower-right corner of the map.
To pan the map, press up, down, right, or left on the Rocker�
Map
pointer
To stop panning, press MENU, and then select Stop Panning�
Zooming In and Out on the Map
The keys control the zoom level, indicated by the scale
at the bottom of the Navigation chart ( ). The bar under the
number represents that distance on the map.