Furuno FAR-28x7 Series Radar Detector User Manual


 
1. RADAR OPERATION
1-24
[PULSE MENU]
1 BACK
2 0.5NM
S1/S2
3 0.75NM
S1/S2/M1
4 1.5NM
S1/S2/M1
5 3NM
S2/M1/M2/M3
6 6NM
M1/M2/M3/L
7 12-24NM
M2/M3/L
[PULSE MENU]
1 BACK
2 0.75NM
S/M1
3 1.5NM
S/M1
4 3NM
M1/M2
5 6NM
M2/L
6 12-24NM
M2/L
3. Roll the wheel to choose 8 [PULSE] and then push the wheel.
PULSE menu PULSE menu
(12, 25 kW X-band) (50 kW X-band, all S-band)
4. Roll the wheel to choose a range and then push the wheel or the left button.
5. Roll the wheel to choose pulselength desired and then push the wheel or the
left button.
6. Push the right button twice to close the menu.
1.15.2 Changing pulselength
1. Roll the trackball to choose the PULSELENGTH box at the left side of the
screen. The guidance box shows “PULSE NARROW / PULSE WIDE.”
PULSE XX*
* XX = Pulse width setting
PULSELENGTH box
2. Push the left button to shorten the pulselength or the right button to widen the
pulselength. You may also choose the pulselength by rolling the wheel and
pushing it or the left button.