Furuno FAR-28x7 Series Radar Detector User Manual


 
4. AIS OPERATION
4-21
[AIS TARGET MENU]
1 SLEEP ALL TRGTS
2 ACTIVATE ALL TRGTS
3 AUTO DISP MESSAGES
OFF/ON
4 [RECEIVED MESSAGES]
5 [TRANSMIT MESSAGE]
6 [VOYAGE DATA]
7 [STATIC DATA]
8 [AIS ALM MESSAGES]
[RECEIVED MESSAGES]
(1/1)
1 BACK [L = TOP]
2 09DEC2003 12:34
ADDRESSED SAFETY
MMSI: 107374182
3
4
5
6
0 NEXT [L = LAST]
4.14.3 Viewing AIS messages
When an AIS message is received, the display shows an appropriate icon to
alert you. If you are set up to automatically display AIS messages they are
automatically displayed upon receipt. The system stores up to 20 AIS messages.
When the storage capacity is reached the oldest AIS message is automatically
erased to make room for the latest. Note that received messages and alarm
messages are not backed up when the power is turned off.
Manually viewing received AIS messages
To view received AIS messages do the following:
1. Roll the trackball to choose the AIS DISP box at the right side of the display.
2. Push the right button to open the AIS TARGET menu.
AIS TARGET menu
3. Roll the wheel to choose 4 RECEIVED MESSAGES and then push the
wheel or the left button. (Up to five received messages are displayed.)
RECEIVED MESSAGES menu
4. Roll the wheel to choose the message which you want to see and then push
the wheel or the left button.