Furuno FAR-28x7 Series Radar Detector User Manual


 
4. AIS OPERATION
4-5
5. Roll the wheel to choose appropriate navigation status number referring to
the information below. Push the wheel.
00: Underway using engine (default)
01: At anchor
02: Not under command
03: Restricted maneuverability
04: Constrained by her draught
05: Moored
06: Aground
07: Engaged in fishing
08: Under way sailing
09: Reserved for high speed craft (HSC)
10: Reserved for wing in ground (WIG, for example, hydrofoil)
11-15: Reserved for future use
6. Roll the wheel to choose 3 ETA and then push the wheel or left button.
7. Use the wheel to enter estimated date and time of arrival, in order of day
(two digits), month, year (four digits) and time. Push the wheel after entering
the data.
8. Roll the wheel to choose 4 DESTINATION and then push the wheel or left
button.
9. Enter destination: Roll the wheel to choose alphanumeric character, push the
wheel to enter.
10. Roll the wheel to choose 5 DRAUGHT and then push the wheel or left
button.
11. Roll the wheel to set ship’s draught (setting range: 0.1-25 m) and then push
the wheel.
12. Roll the wheel to choose 6 CREW and then push the wheel or left button.
13. Roll the wheel to set number of crew (0–8191) and then push the wheel.
14. Push the right button to close the menu.