Filter
Top Products
5-1
5. SETTING, CANCELLING DESTINATION
Destination can be set four ways: by cursor,
by waypoint, by route, and by MOB posi-
tion. Destination cannot be set when there
is no GPS position data. When there is no
position data, the buzzer sounds and the mes-
sage “GPS NO FIX” appears. Previous des-
tination is cancelled whenever a destination
is newly set.
5.1 Setting Destination by
Cursor
1. Press the [GOTO] key to display the
GOTO window.
GOTO
WAYPOINT?
ROUTE?
CURSOR?
OFF?
Quit?
Figure 5-1 GOTO window
2. Select CURSOR?.
3. Press the [ENT] key.
2D
[ 40
]
n
m
72°
54.5
n
m
34°44.000N 135°21.000E
?
Cursor appears with "?".
BRG: +
RNG: +
+GOTO?
Figure 5-2 Cursor appearance
when setting destination by cursor
4. Place the cursor on the location desired
for destination.
5. Press the [ENT] key.
A dashed line connects own ship and the des-
tination, which is marked with CURSOR
and an X, as shown in Figure 5-3.
x
CURSOR
Figure 5-3 Destination set by cursor
5.2 Setting Destination by
Waypoint
1. Press the [GOTO] key.
2. Select WAYPOINT?.
3. Press the [ENT] key. The GOTO WYPT
list appears.
SELECT GOTO WYPT
[NEW?] CURSOR KOBE
MOB OSAKA START
------- -------- -------
------- -------- -------
-------- ------- --------
-------- ------- --------
-------- ------- --------
Figure 5-4 GOTO WYPT list
4. Select a waypoint.
5. Press the [ENT] key.
Own ship’s position becomes starting point
and a dotted line runs between it and the
waypoint selected.