1-7
1.6 Basic Menu Operation
Most operations of the GP-30/35 are carried
out through the menu. Below is a quick in-
troduction to how to select a menu and
change menu settings. If you get lost in op-
eration, press the [MENU] key to return to
the MAIN MENU. A complete menu tree
appears on page A-12.
1. Press the [MENU] key twice to display
the MAIN MENU.
MAIN MENU
WAYPOINTS
ROUTES
PLOTTER
ALARMS
ERASE
D-GPS
CALCULATE
MESSAGES
SATELLITE
GPS SETUP
SYS SETUP
I/O SETUP
LOP SETUP
Figure 1-9 MAIN MENU
2. Operate the Cursor Pad to select a menu
and press the [ENT] key. For example,
select PLOTTER and press the [ENT]
key.
PLOTTER SETUP
TRACK REC : DISTANCE
INTERVAL : 0.10 nm
BRG. REF. : MAG
MAG. VAR. : AUTO E16°
WYPT NAME : DSP GOTO
TRACK MEMORY USED 1%
Figure 1-10 PLOTTER SETUP menu
3. Press ▲ or ▼ to select menu item. For
example, select the TRACK REC line.
4. Press the [ENT] key. A window show-
ing options appears. (The figure below
shows the options available for TRACK
REC.)
OFF
DISTANCE
AUTO
Figure 1-11 Options of TRACK REC
5. Press ▲ or ▼ to select option desired.
6. Press the [ENT] key.
7. Press the [MENU] key twice to finish.
How to enter numeric, character data
In some instances it is necessary to enter nu-
meric or character data. The example below
shows how to enter a time difference of –
6:30, to use local time instead of UTC time.
1. Press the [MENU] key twice to display
the MAIN MENU.
2. Select SYS SETUP and press the [ENT]
key.
SYSTEM SETUP
11–DEC–97 14: 20: 25
DATUM : WGS84
UNITS : nm, kt
TIME DIFF : +00 : 00
SELF TEST?
SIMULATOR?
Figure 1-12 SYSTEM SETUP menu
3. Press ▼ to select the TIME DIFF line.
4. Press the [ENT] key. A cursor circum-
scribes “+”. The cursor selects the data
to change.
SYSTEM SETUP
DATUM : WGS84
UNITS : nm, kt
TIME DIFF : +00 : 00
SELF TEST?
SIMULATOR?
11–DEC–97 14: 20: 25
Figure 1-13 SYSTEM SETUP menu,
TIME DIFF line selected
5. Press ▲ to display “–”.
6. Press s to send the cursor to the next
digit.
7. Press ▲ or ▼ to display 0.
8. Press s to send the cursor to the next
digit.