Filter
Top Products
2-2
2D
[ 40
]
n
m
CSE:
7°
SPD:
9.0
k
t
34°44.000N 135°21.000E
Own ship’s position in
latitude and longitude
Own ship’s position
(Blinking)
Course
Speed
Figure 2-4 Data displayed on the Plotter
display when the cursor is turned off
2.3 Shifting the Display
The display can be shifted on the Plotter dis-
play. Operate the Cursor Pad to place the
cursor at an edge of the screen. The display
shifts in the direction opposite to Cursor Pad
operation.
When own ship tracks off the display it is
automatically returned to the screen center.
2.4 Centering Own Ship’s
Position
1. Press the [MENU] key.
2. Select SHIP TO CENTER?.
3. Press the [ENT] key.
2.5 Changing Track Plotting
Interval, Stopping Plotting
of Track
In drawing track, first the ship’s position (fed
from the GPS receiver) is stored into the
memory at an interval of distance or auto-
matic recording. For distance, a shorter in-
terval provides better reconstruction of the
track, but the storage time of the track is re-
duced. When the track memory becomes
full, the oldest track is erased to make room
for the latest.
1. Press the [MENU] key twice.
MAIN MENU
WAYPOINTS
ROUTES
PLOTTER
ALARMS
ERASE
D-GPS
CALCULATE
MESSAGES
SATELLITE
GPS SETUP
SYS SETUP
I/O SETUP
LOP SETUP
Figure 2-5 MAIN MENU
2. Select PLOTTER.
3. Press the [ENT] key.
PLOTTER SETUP
TRACK REC : DISTANCE
INTERVAL : 0.10 nm
BRG. REF. : MAG
MAG. VAR. : AUTO E16°
WYPT NAME : DSP GOTO
TRACK MEMORY USED 1%
Figure 2-6 Plotter setup menu