Furuno GP-3500 GPS Receiver User Manual


 
7-1
7. NAVIGATION
This section shows you how to get to a desired destination by using “quick
points,’ waypoints, port services and routes.
7.1 Navigating to Quick Points
The quick point feature allows you to navigate to point (s) without retaining the
date indefinitely in your unit’s memory. Each time a quick point is entered,
previous quick points having the same numbers as newly entered ones are
written over.
Selecting quick point entry method
You need to tell your unit how to set the quick point: 1 POINT or 35 POINTS (up
to 35 points), NEAR SERVICE or PORT SERVICE. (For NEAR SERVICE and
PORT SERVICE, see page 7-5.) The PORT SERVICE is available for
NavChart
TM
/FURUNO specification.
1. Press the [MENU] key to show the main menu.
2. Press the [0] key to show the SYSTEM SETUP menu.
3. Press the [1] key to show the DISPLAY SETUP menu.
4. If page 2/2 appears, rotate the [ENTER] knob to select NEXT PAGE to show
page 1/1.