Furuno GP-3500 GPS Receiver User Manual


 
7. NAVIGATION
7-11
Skipping route waypoints
In some instances you may want to “skip” waypoints while following a route. In
the figure below, for example, the vessel has decided to navigate from waypoint
05 to 03, skipping waypoint 04.
PORT 1
PORT 2
Waypoint 1
Waypoint 2
Waypoint 3
Waypoint 4
Waypoint 5
Waypoint 6
New course line
1. Press the [MENU] key to show the main menu.
2. Press the [2] key to show the ROUTES LIST.
3. Rotate the [ENTER] knob to select a route.
4. Press the [ENTER] knob three times to show the waypoints list.
5. Rotate the [ENTER] knob to select the waypoint you want to skip.
6. Press the [CURSOR ON/OFF] key to show “-“ next to the waypoint selected
at step 5.
000002 ROUTE LIST PAGE 1/2
NO. WPT LATITUDE LONGITUDE DISTANCE TTG
1 000001 34˚44.041'N 135˚21.255'E 0.00nm 0.0H
2 -000002 34˚44.237'N 135˚20.936'E ---.--nm -----.-H
3 000003 33˚43.878'N 134˚20.049'E 1.00nm 0.1H
4 ------ --˚--.---'N ---˚--.---'E ---.--nm -----.-H
Skipped waypoint
Waypoints window
Note: To restore the waypoint, press the [CURSOR ON/OFF] key again to
erase the “-“.
7. Press the [MENU] key several times to close the menu.