Furuno GP-3500 GPS Receiver User Manual


 
3. TRACKS
3-7
3.2.2 Connecting own ship’s track when resuming plotting
When you resume plotting of own ship’s track, the point where plotting was
stopped and restarted can be connected with a straight line.
1. Press the [MENU] key to show the main menu.
2. Press the [4] key to display the MARKS/SHIP’S TRACKS SETUP menu.
3. If PAGE 2/2 appears, rotate the [ENTER] knob clockwise to select
“PREVIOUS PAGE.”
4. Rotate the [ENTER] knob to choose the “PLOT TRACKS (HOLD).”
5. Press the [1] key to choose ON or the [2] key to choose OFF as appropriate
ON: Stopping and resuming points are connected with a straight line.
OFF: Stopping and resuming points are not connected.
Track shown by
dashed lines
not displayed.
Actual Track
Plotting
Restarted
Own Ship
Plotting
Suspended
Track points where plotting was suspended
and restarted are not connected.
Track points where track plotting was
stopped and restarted are connected
with a straight line.
Own Ship
Track connected
Display after stopping
5. Press the [MENU] key several times to close the menu.