Furuno GP-3500 GPS Receiver User Manual


 
8. ALARMS
8-6
8.5 Speed Alarm
The speed alarm warns you when your boat’s speed is within or over the speed
range set.
1. Press the [MENU] key to show the main menu.
2. Press the [6] key to show the ALARMS SETUP menu.
3. Rotate the [ENTER] knob to select SPEED ALARM.
4. Press the [1] or [2] key to select “1. INSIDE” or “2. OUT” as appropriate.
5. Rotate the [ENTER] knob to select MINIMUM SPEED.
6. Press the numeric keys to enter the minimum speed value, and then press
the [ENTER] knob.
7. Rotate the [ENTER] knob to select MAXIMUM SPEED.
8. Press the numeric keys to enter the maximum speed value, and then press
the [ENTER] knob.
9. Press the [MENU] key several times to close the menu.
Note: To deactivate the alarm, select “3. OFF” at step 4.
8.6 Trip Log Alarm
The trip log alarm informs you when you have traveled a certain distance.
1. Press the [MENU] key to show the main menu.
2. Press the [6] key to select ALARMS SETUP menu.
3. Rotate the [ENTER] knob to select TRIP LOG ALARM.
4. Press the [1] key to select “1. ON.”
5. Press the numeric keys to enter the trip log value, and then press the
[ENTER] knob.
6. Press the [MENU] key several times to close the menu.
Note: To deactivate the alarm, select “2. OFF” at step 4.