Filter
Top Products
11-10
11.5 CONFIGURATION menu
The configuration menu has facilities for set-
ting up data ports, uploading/downloading
data, self test, demonstration mode setup,
and memory clearing.
1. Press the [MENU] key.
2. Press the soft key CONFIGURATION to
display the configuration menu.
CONFIG
DGPS 3D
SETUP NMEA PORT 1
UPLOAD/DOWNLOAD DATA
SETUP NMEA/DGPS PORT 2
SYSTEM MENU
RETURN
Figure 11-18 Configuration menu
SETUP NMEA PORT 1 menu
description
This menu sets up DATA PORT 1 according
to the specifications of the equipment con-
nected to it. The menu can be displayed by
pressing the [MENU] key followed by the soft
keys CONFIGURATION and SETUP NMEA
PORT 1. For detailed information, see the
Installation Manual.
DGPS 3D
SETUP
PORT 1
EDIT
FORMAT NMEA0183
Ver2.0
LAT/LON FORMAT DD°MM.MMM’
RETURN
SELECT
SNTNC.
s
Figure 11-19 Setup NMEA port 1 (or 2) menu
FORMAT
Selects NMEA0183 version 1.5 or 2.0. If you
are unsure of the version of external equip-
ment try both and choose the one which out-
puts data correctly. The default setting is
version 2.0.
LAT/LON FORMAT (GGA only)
Selects the seconds of latitude and longitude
positions in hundredths, thousandths or ten
thousandths.
Soft key SELECT SNTNC
This key enables/disables input/output of data
sentences.
SETUP NMEA/DGPS PORT 2 menu
description
This menu should be set according to the
specifications of the equipment connected to
connectors PORT 1 (NMEA) and PORT 2
(DGPS) at the rear of the display unit. The
menu can be displayed by pressing the
[MENU] key followed by the soft keys CON-
FIGURATION and SETUP NMEA PORT 2.
For detailed information, see the Installation
Manual.
FORMAT
Selects data format of connected equipment;
NMEA0183 version 1.5, version 2.0,
RTCM104 (EXTRN), RTCM104 (INTRN) or
RTCM104 (OUTPUT). RTCM104 (INTRN) or
RTCM104 (OUTPUT) is for GP-1850DF only.
LAT/LON FORMAT (GGA only)
This setting can be performed when
NMEA0183 Ver.1.5 or 2.0 is selected as the
FORMAT. It displays the seconds of latitude
and longitude positions in hundredths, thou-
sandths or ten thousandths.