Filter
Top Products
11-4
POSITION DISPLAY
Displays position in latitude and longitude
(default setting) or Loran C or Decca TDs.
SET GO TO METHOD
Selects the method for entering the quick
point: 1 POINT (default setting), 35 POINT
(2-35 points), or WPT/PORT SER. For fur-
ther details see pages 8-1 and 8-2.
OPERATION MODE
Selects the operation mode between PLEA-
SURE and FISHING. For further details see
page 3-8.
DISPLAY SETUP2 menu description
The display setup2 menu contains video
sounder-related items which the user may
adjust as desired. Set up these items as fol-
lows:
1. Press the [MENU] key.
2. Press the soft key DISPLAY OPTIONS.
3. Press the soft key NEXT PAGE.
DGPS 3D
DISPLAY
SETUP2
RETURN
EDIT
SPEED SOURCE
TEMP SOURCE
TEMP GRAPH
ZOOM MARKER
SPEED ADJ.
TEMP ADJ.
DEPTH ADJ.
GPS
OWN XDCR
OFF
ON
+00%
+00.0
°
C
+0.0ft
SPD
10.0kt
TEMP
+ 5.0°C
DEPTH
60.4ft
s
Figure 11-6 Display setup2 menu
SPEED SOURCE
Selects source of speed input; OWN
PDDWHL (speed sensor) or GPS (default
setting).
TEMP SOURCE
Selects source of water temperature input;
NMEA (external), or OWN XDCR (water tem-
perature sensor, default setting).
TEMP GRAPH
Displays water temperature in line graph
form. (See Figure 2-2 on page 2-2.) Requires
water temperature data. The default setting
is off.
ZOOM MARKER
The zoom marker appears in the normal, bot-
tom marker and bottom zoom displays and
marks the area which is expanded in the bot-
tom marker and bottom zoom pictures. You
can turn on/off the marker as desired. The
default setting is off.
SPEED ADJ.
If the speed sensor-generated speed indica-
tion is wrong, you can correct it here. (NMEA
format speed data cannot be adjusted.) For
example, if the speed indication is 10% lower
than actual speed, press ▲ to display +10.
The default setting is zero.
TEMP ADJ.
If the water temperature sensor-generated
water temperature indication is wrong, you
can correct it here. (NMEA format water tem-
perature data cannot be adjusted.) For ex-
ample, if the water temperature indication is
2° higher than actual water temperature,
press ▼ to display -12.0. The default setting
is zero.
DEPTH ADJ.
The depth indication can be offset to increase
accuracy. The procedure is similar to that for
TEMP ADJ and SPEED ADJ.