Furuno GP-1850DF GPS Receiver User Manual


 
3-8
3.9 Changing Operation Mode
Operation mode can be changed between
PLEASURE and FISHING. FISHING mode
provides mark/line entry on the own ship’s
position. See chapter 5. Pressing the [HIDE/
SHOW] key changes the function of soft keys.
Holding track, changing track color,and se-
lecting color and form of mark/line can be
performed by the soft keys directly.
1. Press the [MENU] key and the soft key
DISPLAY OPTIONS. The display setup1
menu appears.
DGPS 3D
DISPLAY
SETUP1
RETURN
EDIT
RNG & BRG MODE
RANGE/SPEED UNIT
DEPTH UNIT
TEMP UNIT
LAT/LON DISPLAY
TIME DISPLAY
WAYPOINTS SW
COURSE VECTOR
BEARING
MAG VARIATION
TD DISPLAY
POSITION DISPLAY
SET GO TO METHOD
OPERATION MODE
RHUMB LINE
nm / kt
ft
°F
DD°MM.MMM'
24 HOUR
AUTO2
LINE
MAGNETIC
AUTO 01.3°E
LORAN C
LAT/LON
1 POINT
PLEASURE
NEXT
PAGE
s
Fifure 3-16 Display setup1 menu
2. Press to select OPERATION MODE.
3. Press the soft key EDIT to show the OP-
ERATION MODE window.
OPERATION MODE
'
PLEASURE
FISHING
Figure 3-17 OPERATION MODE window
4. Press or to select PLEASURE or
FISHING.
5. Press the soft key ENTER or the [ENTER]
key to finish.
3.10 Navigation Trip Distance
The navigation trip distance is displayed at
the navigation data display. Press the [PLOT]
key several times to show the navigation
data display.
DGPS 3D
BEACON
INFO
SAT
INFO
ZOOM
TD
LAT/LON
DATE: OCT 21 2000 TIME 23:59:59
POSITION
34° 56.789' N
135° 56.789' E
RNG
nm
123.25
BRG
299.9°
SPD
kt
12.5
CSE
359.9°
DATUM: WGS-84
LAT
LON
TMP 65.8°F DEP 20.8ft
TRIP: 4792 nm
Trip
Figure 3-18 Navigation data display
Note: When you enlarge POSITION, TRIP is
not displayed.
You can reset the trip distance as follows.
1. Press the [MENU] key followed by the
soft keys CONFIGURATION and SYS-
TEM MENU.
2. Press the soft key MEMORY/TRIP
CLEAR to open the clear memory menu.
DGPS 3D
RETURN
CLEAR
MEMORY
EDIT
CLEAR PLOTTER MEMORY
CLEAR GPS MEMORY
CLEAR ALL MEMORY
TRIP METER RESET
NO
NO
NO
NO
Figure 3-19 Clear memory menu
3. Press
to select TRIP METER RESET.
4. Press the soft key EDIT.
5. Press
to select YES.
6. Press the soft key ENTER or the
[ENTER] key to clear memory selected.