Filter
Top Products
E-SERIES (May, 2004)40
E-SERIES (May, 2004) 41
STATEMENTS OF CONFORMITY
219 See combined statements under “212/219” for all
vehicle types.
220 The statements below are applicable to the Cutaway
equipped with the School Bus Prep Package when
completed as a school bus:
The Cutaway body structure as manufactured by Ford,
does not meet the strength requirements of FMVSS 220,
School Bus Rollover Protection; accordingly Ford Motor
Company makes no representation as to conformity of
the completed vehicle with this Standard.
221 The statements below are applicable to the Cutaway
equipped with School Bus Prep Package when
completed as a school bus:
This vehicle when completed, will conform to Standard
221, School Bus Body Joint Strength, if:
• No alterations or modifications are made to the
body panel joints as manufactured by Ford Motor
Company from the forwardmost point of the windshield
rearward.
• The passenger rst row seating reference point is
located 762.0 mm [30.00 inch] or more, rearward of
the back of the Cutaway body.
Any additional maintenance panels or body panel joints
that are added to this vehicle must comply with the
requirements of this regulation.
222 The statement below is applicable to the Cutaway
equipped with the School Bus Prep Package when
completed as a school bus:
Conformity with Standard 222, School Bus Passenger
Seating and Crash Protection, is not substantially affected
by the design of this incomplete vehicle; accordingly
Ford Motor Company makes no representation as to
conformity with this Standard.
225 The statement below is applicable to all incomplete
vehicle types except Basic (Stripped) Chassis:
This vehicle, when completed, will conform to Standard
225, Child Restraint Anchorage Systems, if:
• No alterations are made to the front passenger seat
tether anchorages and access to the anchorages is
not restricted, and no alterations are made to the seat
assemblies, their anchorages, the oor pan, or oor
pan reinforcements, and no seats are added.
Because the addition of seats would change compliance
with this Standard, Ford Motor Company makes no
representations as to conformity with this Standard for
any vehicle that has seats added by Intermediate or Final
Stage Manufacturers.
225 The statement below is applicable to the following
incomplete vehicle type:
• E-Series Basic (Stripped) Chassis
Conformity with Standard 225, Child Restraint
Anchorage Systems, is not substantially affected by
the design of this incomplete vehicle; accordingly,
Ford Motor Company makes no representations as to
conformity with this Standard.