Filter
Top Products
E-SERIES (May, 2004)24
E-SERIES (May, 2004) 25
STATEMENTS OF CONFORMITY
207 The statements below are applicable to the following
incomplete vehicle types when equipped with
untrimmed front seats:
• Incomplete E-Series Van
• Cutaway
This vehicle when completed, will conform to Standard
207, Seating Systems, if:
• No changes or modications are made to the front
seat frames, latches, hardware, and padding.
• The weight of each completely trimmed front seat
does not exceed the value in Table H on this page.
• No modications are made to the oor pan in the area
of the front seat attachments.
• The front seat and seat belt anchorages are not
relocated.
If the front seat attaching hardware is removed for any
reason, it must be reinstalled to the specications in
Figure B for E-Series on page 31.
Any seating systems added to this vehicle must conform
to the applicable requirements of this Standard.
The Incomplete E-Series Recreational Van may have
additional anchorages for rear seats other than the front
driver and passenger seats. These locations apply to
specific hardware and designated seating positions
used in Ford completed vehicles. If these anchorages
are used without the appropriate Ford seats, seat belt
systems, and hardware, Ford Motor Company makes no
representation as to conformity with this Standard.
207 The statements below are applicable to the following
incomplete vehicle types with no front seats:
• Incomplete E-Series Van
• Cutaway
• E-Series Basic (Stripped) Chassis
Conformity with Standard 207, Seating Systems, is not
substantially affected by the design of this incomplete
vehicle; accordingly, Ford Motor Company makes no
representation as to conformity with this Standard.
The Cutaway, when equipped with seat delete option,
will include both front seat pedestals, pretensioner
restraint systems, seat tracks, and a temporary driver’s
seat. The pretensioner restraint system is attached to
the seat track. Therefore, the completed seat assembly
must comply with the requirements of Standard 207
and 210.
The Incomplete E-Series Recreational Van may have
additional seat anchorages. These locations apply to
specific hardware and designated seating positions
used in Ford completed vehicles. If these anchorages
are used without the appropriate Ford seats, seat belt
systems, and hardware, Ford Motor Company makes no
representation as to conformity with this Standard.
207 (Continued)
TABLE H
E-SERIES COMPLETED UNTRIMMED SEAT WEIGHT
Maximum Weight (lb)
Description Driver-Side Passenger-Side
E-Series Captain’s Chair – Manual Tracks 59.0 61.0
E-Series Captain’s Chair – Manual Tracks – Manual Lumbar 62.0 68.0
E-Series Captain’s Chair – Power Tracks – Manual Lumbar 68.0 N/A