Filter
Top Products
E-SERIES (May, 2004)16
E-SERIES (May, 2004) 17
STATEMENTS OF CONFORMITY
106 The statement below is applicable to all incomplete
vehicle types:
This vehicle, when completed, will conform to Standard
106, Brake Hoses, if the brake hose assemblies supplied
by Ford Motor Company are not removed, relocated,
altered, or modied and if no brake hose assemblies
are added.
108 In addition to the statements pertaining to particular
incomplete vehicle types which follow on pages
18 and 19, the statements immediately below,
concerning Standard 108 Lamps, Reective Devices,
and Associated Equipment are applicable to all
incomplete vehicle types except the Basic (Stripped)
Chassis:
No additional components may be added to the
vehicle which require the use of tools to remove such
components, for access to the headlamp aiming devices
as provided by Ford Motor Company.
Daytime Running Lamps (DRL’s); Light Trucks for sale
or use in Canada are equipped with DRL’s that meet
the Canadian DRL requirements. As manufactured for
Canada, the E-Series vehicles will meet the FMVSS 108
requirement for DRL’s when DRL’s are provided.
Conformity with Standard 108, S.12, Headlamp
Concealment Devices, are not substantially affected
by the design of this incomplete vehicle; accordingly,
Ford Motor Company makes no representation as to
conformity with this Standard.
108 The statement below is applicable to the following
vehicle type with a GVWR of 4536 kg [10,000 lb] or
less and a vehicle width less than 2032 mm [80.00
in]:
• Cutaway
This vehicle, when completed, will conform to Standard
108, Lamps, Reflective Devices, and Associated
Equipment if a Center High Mounted Stop Lamp
(CHMSL) is installed so it meets all the requirements of
this standard and is connected to the electrical power
source as provided by Ford Motor Company. See the
gure below for circuit location.
CENTER HIGH-MOUNTED STOP LAMP (CHMSL)
ELECTRICAL CONNECTOR LOCATION
TO INSTALL “CHMSL”
UNWRAP TAPE FROM
HARNESS IN THIS AREA
AND REMOVE JUMPER
CONNECTION TO EXPOSE
THE “CHMSL CONNECTOR”.
E-SERIES CUTAWAY
FRONT OF
VEHICLE
THE “CHMSL” ELECTRICAL CONNECTION FOR
AN ECONOLINE BASIC (STRIPPED) CHASSIS IS
PROVIDED IN A DETAILED SCHEMATIC WHICH
IS PACKAGED WITH THE BODY BUILDER
ELECTRICAL CONNECTORS.