Filter
Top Products
55
NOTE: A cassette tape can be loaded with the
ignition on whether or not the radio power is on.
However, with radio power off, the cassette tape is
loaded and stored.
NOTE: Noise reduction system manufactured under
license from Dolby Labs Licensing Corporation.
“Dolby” and double-D symbol are trademarks of
Dolby Laboratories Licensing Corporation.
How to locate a desired track on the tape
There are four ways to quickly locate a desired
selection on the tape. You can use the fast forward,
rewind, “SEEK” or “SCAN” function. Following are
brief descriptions of each.
❑
Fast forwarding the tape
To fast forward the tape, press the “FF” button.
The radio will begin playing until fast forward is
manually stopped (by pushing the “TAPE” button)
or the end of the tape is reached.
At the end of the tape, the direction automatically
reverses and plays the other side of the tape.
❑
Rewinding the tape
To rewind the tape, press the “REW” button. The
radio will begin playing until rewind is manually
stopped (by pushing the “TAPE” button) or the
beginning of the tape is reached.
❑
Using the “SEEK” function with your cassette
tape player
While in the tape mode, push the right
a
side of
the “SEEK” button to seek forward to the next
selection on the tape. Push the left
b
side to seek
the previous tape selection.
❑
Using the “SCAN” function with your cassette
tape player
Press the “SCAN” button to begin the forward scan
mode on the tape currently playing, stopping on
each tape selection for approximately an
eight-second sampling (display indicates “SC”).
File:04fnas8.ex
Update:Wed Jun 19 10:43:44 1996