Filter
Top Products
128
The anti-theft system is designed to work with the
factory installed remote entry system. It may not
work with other remote entry systems.
Disarming an Untriggered Anti-Theft
System
You can disarm the system by:
❑
unlocking a front door with the key (turn the
key all the way to the end of travel or the
system will not disarm).
❑
using the keyless entry unlock code.
❑
using the UNLOCK button of the remote entry
transmitter.
❑
turning the ignition to ON or ACC.
If you armed the system while inside your vehicle,
you can disarm it by turning the ignition to the ON
or ACC position. This allows you to open the front
door and exit without triggering the system.
Triggering the Alarm System
The armed system will be triggered if:
❑
any door is opened without disarming the
system (see previous paragraphs), or
❑
the hood is opened.
Disarming a Triggered System
The alarm can be disarmed by:
❑
unlocking a front door with the key
❑
using the keyless entry unlock code
❑
using the UNLOCK control on the remote entry
transmitter
NOTE: The flashing lights and honking horn will
shut off automatically approximately three minutes
after the system is triggered. It will trigger again if
another intrusion occurs. However, the engine will
not be allowed to start until the system is disarmed.
File:05fncf8.ex
Update:Thu Jun 27 10:02:20 1996