Filter
Top Products
136
To operate the Heated Seat System:
1. Select mode.
❑
“Both” to heat the seat back and seat cushion
❑
“Back” to heat the seat back only
2. Turn the knob to “LO” (the lowest heat level).
Allow five minutes for the heat level to
stabilize.
3. If the heat level is not high enough for
comfort, select increased heat levels. Allow at
least two minutes for the heat level to stabilize
at any new level selected.
4. If the heated seat is not turned off, the seat
will heat up to the selected temperature level
each time the car is started.
NOTE: Cooling the seat down takes considerably
longer than increasing its heat level.
Auto-Glide Seats
Auto-Glide is a feature which automatically moves
the seat forward or rearward when the seatback is
tilted forward or rearward to allow ease of entry
into the rear seat.
NOTE: This feature can turned off. For more
information see the Message Center Driver Settings
section in the Instrumentation chapter.
With the ignition OFF, the driver’s seat Auto-Glide
will only function when the gearshift is in N
(Neutral) or P (Park), and at least one of the
vehicle’s doors is open. If the ignition is ON,
Auto-Glide will function with the transmission
selector in N (Neutral) or P (Park).
With the ignition OFF, the passenger seat
Auto-Glide will only function when at least one of
the vehicle’s doors are open. If the ignition is ON,
Auto-Glide will function. However, Auto-Glide will
operate while occupied during rear travel.
File:06fnss8.ex
Update:Wed Jun 19 15:04:39 1996